Macerator

Tri-Hammer macerators have been installed worldwide for the efficient maceration of raw sewage on low flow applications and offer both an improvement in energy consumption and lower spares prices.  A  three hammer impeller gives more ‘blows’ per revolution for more efficient grinding.

These macerators can be installed vertically or horizontally as a stand alone unit, or, combined with a Mono progressing cavity pump to form a range of Packaged Pumping Systems.

For customers who have the old type Mutrator units or older design macerators, a special adaptor ring is available to enable easy retrofitting without the need to disturb the existing baseplate or suction pipe.

Applications

Features & Benefits

• Units can operate in a vertical or horizontal mounting position
• A tri-hammer impeller offers more cuts per revolution for efficient maceration
• The inlet chamber contains 2 large anti-swirl fins to stop 'spinning' of textiles and to direct solids in suspension into the optimum flow path for maceration through the impeller
• Entire seal assembly is oil lubricated and mounted out of contact with the liquid being processed giving a substantial increase in seal life expectancy
• Standard IP55 motor, single or 3 phase
• Both models available with straight in or 90° inlet chambers

Performance Data

• Literature
• O&M

Tri-Hammer Macerator

Macerator Operation & Maintenance Manual