Products
Sun-Sub
The Sun-Sub is a submersible pump and is the most popular Mono solar pump. Available, with either a stationary or GPS Tracking array, ranging from 150 Watts up to 2400 Watts, these systems can produce very high flows and discharge pressures up to 150m.
Mono Sun-Sub solar pumping systems have helped thousands of farmers and remote villages solve their water supply problems. They have replaced windmills or diesel powered pumps on remote bores providing economic, trouble free and reliable water.
The Mono Sun-Sub solar pump provides its own power eliminating the need for diesel fuel or AC power.
The system is easily automated to turn on or off controlled by float switch, pressure kit or built in electronic pressure control with float valves. Once your tanks & troughs are full, the pump will turn off, conserving water and reducing wear on the pump. The pump will turn itself back on again when more water is needed.
All Sun-Sub systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller. The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets so electrical connections, do not require an electrician.
Accurately select the best system to meet your requirements using CASS (Computer Aided Solar Selection) software.
Sun-Sub solar pumping systems can be further enhanced with the use of GPS Tracking solar arrays, AC PowerPak generator interfaces and Sun-Dial telemetry systems.
The Progressive Cavity (PC) helical rotor pump element used in borehole applications is proven to provide maximum water output even in bores containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores.
The PC pump will deliver water with every rotation regardless of speed, on solar, when pump speed will vary with the amount of sun it is important to get water with every turn of the pump.
The Sun-Sub fits in a 4” bore and its little brother the SB3 fits in a 3” bore.
Capacity | Pressure | ||
---|---|---|---|
m³/h | Up to 117 | bar | Up to 15 |
gpm | Up to 25,770 | psi | Up to 217 |
Applications
Water extraction from bore holes | Wells |
De-watering | Creeks & Streams |
Watering stock | General water transfer |
Tube wells | Irrigation |
Remote location water supply | Aqua culture |
Features & Benefits
- Solar power - no fuel costs, maximum power and water when you need it most
- Self contained - no need to connect AC power or transport fuel
- Simple design, proven technology - you can rely on it to work
- Supplied as a complete package - easy to install
- Highly efficient components - more water output
- CASS selection software - helps you to select the best system for your application.
- Full 24-Month warranty - peace of mind
- The rate at which water is pumped can be limited to suit the water source.
- Built in pressure switch.
Performance Data
Mono Pump’s CASS program offers you the right solution for each individual application. It is vital that the right solar pumping system is installed to fit your specific requirements. By using our CASS program you will always have the right Mono Solar pump to suit your individual needs.
The CASS program uses historical meteorological data and the results of extensive system testing to predict the daily average flow for each month of the year based on your site conditions.
To ensure you get the right system for your specific application download CASS here.